Greenlee DM-510A Manuel d'instructions télécharger pdf (Page 5)

DM-200A • DM-210A • DM-510A

Important Safety Information

Electric shock hazard:

Unless measuring voltage, current, or frequency, shut off and lock out power. Make sure that all •

capacitors are discharged. Voltage must not be present.

Set the selector and connect the test leads so that they correspond to the intended measurement. •

Incorrect settings or connections can result in a blown fuse.

Using this unit near equipment that generates electromagnetic interference can result in unstable •

or inaccurate readings.

Failure to observe these warnings could result in severe injury or death.

Electric shock hazard:

Do not change the measurement function while the test leads are connected to a component or

circuit.

Failure to observe this precaution may result in injury and can damage the unit.

Electric shock hazard:

Do not use the tester to measure voltages in circuits that could be damaged or activated by the

AutoCheck™ mode’s low input impedance (approximately 2.5 kΩ and 120 pF).

Failure to observe this precaution may result in injury and can damage the unit.

Electric shock hazard:

Do not attempt to repair this unit. It contains no user-serviceable parts.•

Do not expose the unit to extremes in temperature or high humidity. Refer to “Speciﬁcations.”•

Failure to observe these precautions may result in injury and can damage the unit.

1 2 3 4 5 6 7 8 9 10 ... 71 72

Pas de commentaire

Greenlee DM-510A Manuel d'instructions Page 5